ZQ/JZQ series Cylindrical Gearbox Reducer

BESCHRIJVING

The ZQ/JZQ series reducer is a cylindrical gear reducer and a two-stage cylindrical gear drive. Widely used in lifting machinery, mining machinery and general chemical industry, its working temperature is -40C ° ~ +45C °, the input speed is not higher than 1500 rpm, the gear drive peripheral speed must not exceed 4 m / s, It can be operated in both forward and reverse directions. The reducer being applied to right to and reverse direction 9 transmission ratio, 9 installing mode and 3 low-speed axle edge type.

SPECIFICATIE

Gearbox Model	Verhouding	Output power (KW)	Input Speed (Rpm)	Output torque (kN·m)
ZQ250/JZQ250	8.23~48.57	0.4~18.8	750	250~340
			1000	230~340
			1250	220~340
			1500	200~340
ZQ350/JZQ350	8.23~48.57	0.95~27	750	640~800
			1000	610~790
			1250	580~780
			1500	540~770
ZQ400/JZQ400	8.23~48.57	1.6~26	600	815~1630
			750	775~1620
			1000	690~1600
			1250	630~1580
			1500	590~1570
ZQ500/JZQ500	8.23~48.57	6.7~60.5	600	1800~2700
			750	1650~2700
			1000	1450~2600
			1250	1300~2600
	10.35~48.57		1500	1400~2550
ZQ650/JZQ650	8.23~48.57	6.7~106	600	3350~6350
			750	2900~6250
			1000	2700~6200
	10.35~48.57		1250	3200~600
	15.75~48.57		1500	3200~5900
ZQ750/JZQ750	8.23~48.57	9.5~168	600	5200~9500
			750	4700~8900
	12.64~48.57		1000	5600~8700
	15.75~48.57		1250	5600~8500
	20.49~48.57		1500	6350~8300
ZQ850/JZQ850	8.23~48.57	13.1~264	600	7680~12280
			750	6900~12180
	12.64~48.57		1000	9000~11840
	20.49~48.57		1250	9820~11640
ZQ1000/JZQ1000	8.23~48.57	43~355	600	10700~20900
			750	9540~20600
	15.57~48.57		1000	12900~20000
	23.34~48.57		1250	15500~19500

KENMERKEN:

1. The speed of gear transmission of the reducer shall not exceed 10 meters/second;
2. The speed of the high-speed shaft of the reducer shall not exceed 1500 revolutions per minute;
3. The reducer is used for forward and backward running;
4. deceleration machine working environment temperature of 40 ℃ to + 40 ℃
5. The reducer has nine transmission ratios, nine configuration types and three low-speed shaft end types.
6. The transmission ratios of such reducers are: 48.57, 40.17, 31.5, 23.34, 20.49, 15.75, 12.64, 10.35 and 8.23.

TEKENING:

TOEPASSINGEN:

Metallurgie, mijnbouw, chemische industrie, bouwmaterialen, hijsen, transport, textiel, papier maken, voedselplastic, rubber, machinebouw en energie-industrie

PRODUCTFOTO

Standaard exportpakket met multiplex koffer